BENEFITS AND FEATURES
Helps fight Acid Re flux (Acidity)
Boosts skin health
Improve bone health A Reduce High Blood Pressure,
Blood Sugar, and Cholesterol
WHAT MAKES PERFECT-ION UNIQUE?
1.) Water filtration unit With
a) Sediment filtration b) Ceramic filtration
c) Active carbon filtration
2.) Active hydrogen upto: 400
3.) Negative orp upto: 300
4.) Produces water of 2
different pH a) Upto 9.5 pH b) Upto 10.5 PH
LIFE The N-SF 9.5 & N-SF 10.5 mineralisers can be used for about 3000 litres but depends on the quality of source wate
r. Please make sure to use purified water for good life and optimum results.
FOLLOW THESE STEPS BEFORE USE. First time use and cleaning
• Fill a bowl of purified water in which the whole mineralisers can
be submerged. .
Let the mineralisers be submerged for 15 minutes.
• Take it out and shake very gently for 30 seconds.
• Repeat it 3 times. .
This helps take out loose particles in the mineralisers.
• Mineralisers are ready for use.
HOW TO USE
• Only use Purified or Drinkable Water.
. Fill water in the reservoir tank, takes about few minutes for water
to pass through.
• Mineralised water is ready for use.
• Test the results of the mineralisers every month with pH & ORP
testing liquids included in the box.
• When low or no results found, follow the process of recharging the mineralisers with reduction cleaner solution.
RECHARGE INSTRUCTIONS Please read the ‘Recharge/clean mineralisers’ section before following the steps below.
• Submerge the N-SF 9.5 & N-SF 10.5 mineralisers completely
in purified water.
Leave it for 15 minutes.
• Take out the mineralisers, shake very gently to remove
remaining water & clean with purified water.
. Fix the mineralisers back in the perfect-ion and pass 500 ml of
water and dispose the same water once again.
. The mineralisers are once again ready for providing optimum
IMPORTANT POINTS TO BE
TAKEN CARE OF
• Do not use extreme hot/cold water.
. Only use purified water, water with high TDS will reduce life and results of the N-SF 9.5 & N-SF 10.5 mineralisers.
Note: For all sorts of demonstrations use 10.5 pH water for optimum results.
For any further assistance, feel free to write us on E. firstname.lastname@example.org | Telephone : +91-7733990555